Welcome to our latest short video from Trend, “How to use the Trend Lock Jig”.
T
he Trend LOCK/JIG uses a set of interchangeable templates and with a router will cut the mortise and face-plate recess for popular door locks.
Trend has the right tools to allow you to do a professional job.
Benefits of the Trend Lock Jig:
- Suitable for most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
- Deeper mortises can be achieved with a suitable size of auger bit.
- Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
- Steel plates & body.
- The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.
This short video will show you how to use the Trend Lock Jig to achieve the best result.
You can also view all of Trend’s Lock Jig tools and accessories on our website by clicking on this link. http://www.cooksonhardware.com/browse.php/section/7973/level/4
|
Follow us on our Blog
|
Born to Blog by Cookson Hardware 
